October 7, 2019

Top 19 Best No Drill Concrete Screws

CONFAST 1 4 X 3 1 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 1 4 X 3 1 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 1 4 X 3 1 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 1 4 X 3 1 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box Environment The anchor is designed for use in a Dry environment. FLAT PHILLIPS HEAD Can be driven with Phillips Screw Driver. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. DIAMOND POINT-Easier to drive the screw to save time. SELF-TAPPING-Taps threads directly into masonry and requires no other anchor. Head Style The anchor is a Flat Countersunk Phillips head and is designed to prevent the head from protruding above the surface of the item being attached. Driver Required A 3 is required for driving the anchor into the base material. This anchor is designed for use in Concrete, Block, and Brick. Applications The anchor is made from Carbon Steel, and is Blue. The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. Bosch 91-Piece Drilling and Driving Mixed Set MS 4091. DEWALT DW 5207 7-Piece Premium Percussion Masonry Drill Bit Set. 100 pieces With Drill Bit (Miami-Dade Compliant) (1 / 4 x 1-3 / 4). Chenango Supply 1 / 4 x 1-3 / 4", Flat Head Concrete Screw Anchor. CONFAST 1 / 4", x 4", Flat Phillips Concrete Screw Anchor with Drill Bit (100 per Box). 100 pieces With Drill Bit (Miami-Dade Compliant) (1 / 4 x 2-1 / 4). CONFAST 1 / 4 x 3-3 / 4 Flat Phillips Concrete Screw Anchor with Drill Bit (100 per Box). CONFAST 1 / 4 x 2-1 / 4 Flat Phillips Concrete Screw Anchor with Drill Bit (100 per Box). Chenango Supply 1 / 4 x 2-1 / 4", Flat Head Concrete Screw Anchor. Hole Diameter / Bit Diameter The anchor requires a 3 / 16", hole to be drilled in the base material (Concrete, Block, and Brick). Diameter of Anchor The diameter of the anchor is 1 / 4". Length Anchor The length of the anchor is 3-1 / 4", Thread Length The length of the threads on the anchor is 1-3 / 4", in length. Minimum Embedment The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1", of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-3 / 4", to 2-1 / 4". This will ensure that the minimum embedment of 1", will be met. The 1 / 4", diameter anchor requires the hole in the fixture to be 5 / 16". Spacing between Anchors Each anchor must be spaced a minimum distance of 4", from each other when measured center to center. Edge Distance It is very not to install the anchor any closer than 3", from an unsupported edge of the concrete.

Chenango Supply 3 16 X 2 1 4 Phillips Flat Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 3 16 X 2 1 4

Chenango Supply 3 16 X 2 1 4 Phillips Flat Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 3 16 X 2 1 4

Chenango Supply 3 16 X 2 1 4 Phillips Flat Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 3 16 X 2 1 4

Chenango Supply 3 16 X 2 1 4 Phillips Flat Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 3 16 X 2 1 4 These are commonly known as Tapcons. Used to anchor signs, fixtures to concrete and block buildings. 15-0930.14) from the Miami-Dade Department of Regulatory and Economic Resources, certifying that they meet all Miami-Dade Requirements. These Concrete screws are Miami-Dade Compliant. These Concrete Screws have received Product Control Notice of Acceptance (No. 1000 Hour Salt Spray Test Coating. Phillips Flat Head cuts its own threads in concrete. Concrete Screws or Tapcons are great for screwing into concrete. Chenango Supply 3 / 16 x 1-3 / 4", Hex Head Concrete Screw Anchor. Chenango Supply 3 / 16 x 2-3 / 4", Hex Head Concrete Screw Anchor. 100 pieces With Drill Bit (Miami-Dade Compliant) (3 / 16 x 2-3 / 4). 100 pieces With Drill Bit (Miami-Dade Compliant) (3 / 16 x 1-1 / 4). 100 pieces With Drill Bit (Miami-Dade Compliant) (3 / 16 x 1-3 / 4). DEWALT DW 5207 7-Piece Premium Percussion Masonry Drill Bit Set. Chenango Supply 3 / 16 x 1-1 / 4", Phillips Flat Head Concrete Screw Anchor.

Chenango Supply 3 16 X 3 3 4 Phillips Flat Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 3 16 X 3 3 4

Chenango Supply 3 16 X 3 3 4 Phillips Flat Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 3 16 X 3 3 4

Chenango Supply 3 16 X 3 3 4 Phillips Flat Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 3 16 X 3 3 4

Chenango Supply 3 16 X 3 3 4 Phillips Flat Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 3 16 X 3 3 4 15-0930.14) from the Miami-Dade Department of Regulatory and Economic Resources, certifying that they meet all Miami-Dade Requirements. Used to anchor signs, fixtures to concrete and block buildings. 1000 Hour Salt Spray Test Coating. These Concrete screws are Miami-Dade Compliant. Concrete Screws or Tapcons are great for screwing into concrete. These Concrete Screws have received Product Control Notice of Acceptance (No. Phillips Flat Head cuts its own threads in concrete. These are commonly known as Tapcons. DEWALT DWA 5101 Impact Ready Masonry Bit, 3 / 16", x 4", x 6".

CONFAST 3 16 X 3 1 4 Hex Head Concrete Screw With 3 Drill Bits 300 Per Box

CONFAST 3 16 X 3 1 4 Hex Head Concrete Screw With 3 Drill Bits 300 Per Box

CONFAST 3 16 X 3 1 4 Hex Head Concrete Screw With 3 Drill Bits 300 Per Box

CONFAST 3 16 X 3 1 4 Hex Head Concrete Screw With 3 Drill Bits 300 Per Box The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. This anchor is designed for use in Concrete, Block, and Brick. DIAMOND POINT-Easier to drive the screw to save time. Applications The anchor is made from Carbon Steel, and is Blue. Environment The anchor is designed for use in a Dry environment. SLOTTED HEX HEAD-Can be driven with a nut driver. SELF-TAPPING-Taps threads directly into masonry and requires no other anchor. Head Style The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. Hole Diameter / Bit Diameter The anchor requires a 5 / 32", hole to be drilled in the base material (Concrete, Block, and Brick). Driver Required A 1 / 4", is required for driving the anchor into the base material. Diameter of Anchor The diameter of the anchor is 3 / 16". Length Anchor The length of the anchor is 3-1 / 4", Thread Length The length of the threads on the anchor is 1-3 / 4", in length. Minimum Embedment The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1", of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-3 / 4", to 2-1 / 4". This will ensure that the minimum embedment of 1", will be met. The 3 / 16", diameter anchor requires the hole in the fixture to be 1 / 4". Spacing between Anchors Each anchor must be spaced a minimum distance of 3", from each other when measured center to center. Edge Distance It is very not to install the anchor any closer than 2-1 / 4", from an unsupported edge of the concrete.

Chenango Supply 3 16 X 3 3 4 Hex Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 3 16 X 3 3 4

Chenango Supply 3 16 X 3 3 4 Hex Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 3 16 X 3 3 4

Chenango Supply 3 16 X 3 3 4 Hex Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 3 16 X 3 3 4

Chenango Supply 3 16 X 3 3 4 Hex Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 3 16 X 3 3 4 15-0930.14) from the Miami-Dade Department of Regulatory and Economic Resources, certifying that they meet all Miami-Dade Requirements. These are commonly known as Tapcons. Concrete Screws or Tapcons are great for screwing into concrete. 1000 Hour Salt Spray Test Coating. These Concrete Screws have received Product Control Notice of Acceptance (No. These Concrete screws are Miami-Dade Compliant. Used to anchor signs, fixtures to concrete and block buildings. Hex Head Uses 1 / 4", Nut Driver Cuts its own threads in concrete.

CONFAST 1 4 X 1 3 4 Hex Head Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 1 4 X 1 3 4 Hex Head Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 1 4 X 1 3 4 Hex Head Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 1 4 X 1 3 4 Hex Head Concrete Screw Anchor With Drill Bit 100 Per Box The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. SLOTTED HEX HEAD-Can be driven with a nut driver. DIAMOND POINT-Easier to drive the screw to save time. SELF-TAPPING-Taps threads directly into masonry and requires no other anchor. Environment The anchor is designed for use in a Dry environment. This anchor is designed for use in Concrete, Block, and Brick. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. Applications The anchor is made from Carbon Steel, and is Blue. Head Style The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached. CONFAST 3 / 16 x 1-3 / 4 Hex Head Concrete Screw Anchor with Drill Bit (100 per Box). CONFAST 1 / 4 x 2-1 / 4 Hex Head Concrete Screw Anchor with Drill Bit (100 per Box). CONFAST 3 / 16 x 2-1 / 4 Hex Head Concrete Screw Anchor with Drill Bit (100 per Box). Hole Diameter / Bit Diameter The anchor requires a 3 / 16", hole to be drilled in the base material (Concrete, Block, and Brick). Driver Required A 5 / 16", is required for driving the anchor into the base material. Diameter of Anchor The diameter of the anchor is 1 / 4". Length Anchor The length of the anchor is 1-3 / 4", Thread Length The length of the threads on the anchor is 1-3 / 4", in length. Minimum Embedment The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1", of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1 / 4", to 3 / 4". This will ensure that the minimum embedment of 1", will be met. The 1 / 4", diameter anchor requires the hole in the fixture to be 5 / 16". Spacing between Anchors Each anchor must be spaced a minimum distance of 4", from each other when measured center to center. Edge Distance It is very not to install the anchor any closer than 3", from an unsupported edge of the concrete.

Chenango Supply 3 16 X 4 Phillips Flat Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 3 16 X 4

Chenango Supply 3 16 X 4 Phillips Flat Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 3 16 X 4

Chenango Supply 3 16 X 4 Phillips Flat Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 3 16 X 4

Chenango Supply 3 16 X 4 Phillips Flat Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 3 16 X 4 These are commonly known as Tapcons. Used to anchor signs, fixtures to concrete and block buildings. 15-0930.14) from the Miami-Dade Department of Regulatory and Economic Resources, certifying that they meet all Miami-Dade Requirements. Concrete Screws or Tapcons are great for screwing into concrete. These Concrete Screws have received Product Control Notice of Acceptance (No. Phillips Flat Head cuts its own threads in concrete. 1000 Hour Salt Spray Test Coating. These Concrete screws are Miami-Dade Compliant.

CONFAST 1 4 X 2 3 4 Flat Phillips Concrete Screw With 2 Drill Bits 200 Per Box

CONFAST 1 4 X 2 3 4 Flat Phillips Concrete Screw With 2 Drill Bits 200 Per Box

CONFAST 1 4 X 2 3 4 Flat Phillips Concrete Screw With 2 Drill Bits 200 Per Box

CONFAST 1 4 X 2 3 4 Flat Phillips Concrete Screw With 2 Drill Bits 200 Per Box DIAMOND POINT-Easier to drive the screw to save time. Environment The anchor is designed for use in a Dry environment. SELF-TAPPING-Taps threads directly into masonry and requires no other anchor. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. Head Style The anchor is a Flat Countersunk Phillips head and is designed to prevent the head from protruding above the surface of the item being attached. FLAT PHILLIPS HEAD Can be driven with Phillips Screw Driver. Applications The anchor is made from Carbon Steel, and is Blue. The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. This anchor is designed for use in Concrete, Block, and Brick. Driver Required A 3 is required for driving the anchor into the base material. Hole Diameter / Bit Diameter The anchor requires a 3 / 16", hole to be drilled in the base material (Concrete, Block, and Brick). Diameter of Anchor The diameter of the anchor is 1 / 4". Length Anchor The length of the anchor is 2-3 / 4", Thread Length The length of the threads on the anchor is 1-3 / 4", in length. Minimum Embedment The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1", of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1 / 4", to 1-3 / 4". This will ensure that the minimum embedment of 1", will be met. The 1 / 4", diameter anchor requires the hole in the fixture to be 5 / 16". Spacing between Anchors Each anchor must be spaced a minimum distance of 4", from each other when measured center to center. Edge Distance It is very not to install the anchor any closer than 3", from an unsupported edge of the concrete.

CONFAST 3 16 X 1 3 4 Hex Head Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 3 16 X 1 3 4 Hex Head Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 3 16 X 1 3 4 Hex Head Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 3 16 X 1 3 4 Hex Head Concrete Screw Anchor With Drill Bit 100 Per Box Environment The anchor is designed for use in a Dry environment. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. SLOTTED HEX HEAD-Can be driven with a nut driver. This anchor is designed for use in Concrete, Block, and Brick. DIAMOND POINT-Easier to drive the screw to save time. SELF-TAPPING-Taps threads directly into masonry and requires no other anchor. Applications The anchor is made from Carbon Steel, and is Blue. The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. Head Style The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached. CONFAST 3 / 16 x 2-1 / 4 Hex Head Concrete Screw Anchor with Drill Bit (100 per Box). CONFAST 1 / 4 x 1-3 / 4 Hex Head Concrete Screw Anchor with Drill Bit (100 per Box). Hole Diameter / Bit Diameter The anchor requires a 5 / 32", hole to be drilled in the base material (Concrete, Block, and Brick). Driver Required A 1 / 4", is required for driving the anchor into the base material. Diameter of Anchor The diameter of the anchor is 3 / 16". Length Anchor The length of the anchor is 1-3 / 4", Thread Length The length of the threads on the anchor is 1-3 / 4", in length. Minimum Embedment The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1", of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1 / 4", to 3 / 4". This will ensure that the minimum embedment of 1", will be met. The 3 / 16", diameter anchor requires the hole in the fixture to be 1 / 4". Spacing between Anchors Each anchor must be spaced a minimum distance of 3", from each other when measured center to center. Edge Distance It is very not to install the anchor any closer than 2-1 / 4", from an unsupported edge of the concrete.

CONFAST 1 4 X 1 1 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 1 4 X 1 1 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 1 4 X 1 1 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 1 4 X 1 1 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box SELF-TAPPING-Taps threads directly into masonry and requires no other anchor. Environment The anchor is designed for use in a Dry environment. DIAMOND POINT-Easier to drive the screw to save time. Applications The anchor is made from Carbon Steel, and is Blue. Driver Required A 3 is required for driving the anchor into the base material. Head Style The anchor is a Flat Countersunk Phillips head and is designed to prevent the head from protruding above the surface of the item being attached. The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. This anchor is designed for use in Concrete, Block, and Brick. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. FLAT PHILLIPS HEAD Can be driven with Phillips Screw Driver. Hole Diameter / Bit Diameter The anchor requires a 3 / 16", hole to be drilled in the base material (Concrete, Block, and Brick). Diameter of Anchor The diameter of the anchor is 1 / 4". Length Anchor The length of the anchor is 1-1 / 4", Thread Length The length of the threads on the anchor is 1-1 / 4", in length. Minimum Embedment The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1", of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 0", to 1 / 4". This will ensure that the minimum embedment of 1", will be met. The 1 / 4", diameter anchor requires the hole in the fixture to be 5 / 16". Spacing between Anchors Each anchor must be spaced a minimum distance of 4", from each other when measured center to center. Edge Distance It is very not to install the anchor any closer than 3", from an unsupported edge of the concrete.

CONFAST 1 4 X 3 3 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 1 4 X 3 3 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 1 4 X 3 3 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 1 4 X 3 3 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box Head Style The anchor is a Flat Countersunk Phillips head and is designed to prevent the head from protruding above the surface of the item being attached. DIAMOND POINT-Easier to drive the screw to save time. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. Applications The anchor is made from Carbon Steel, and is Blue. This anchor is designed for use in Concrete, Block, and Brick. SELF-TAPPING-Taps threads directly into masonry and requires no other anchor. FLAT PHILLIPS HEAD Can be driven with Phillips Screw Driver. The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. Environment The anchor is designed for use in a Dry environment. Driver Required A 3 is required for driving the anchor into the base material. CONFAST 1 / 4 x 3-1 / 4 Flat Phillips Concrete Screw Anchor with Drill Bit (100 per Box). Hole Diameter / Bit Diameter The anchor requires a 3 / 16", hole to be drilled in the base material (Concrete, Block, and Brick). Diameter of Anchor The diameter of the anchor is 1 / 4". Length Anchor The length of the anchor is 3-3 / 4", Thread Length The length of the threads on the anchor is 1-3 / 4", in length. Minimum Embedment The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1", of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 2-1 / 4", to 2-3 / 4". This will ensure that the minimum embedment of 1", will be met. The 1 / 4", diameter anchor requires the hole in the fixture to be 5 / 16". Spacing between Anchors Each anchor must be spaced a minimum distance of 4", from each other when measured center to center. Edge Distance It is very not to install the anchor any closer than 3", from an unsupported edge of the concrete.

CONFAST 3 16 X 2 1 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 3 16 X 2 1 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 3 16 X 2 1 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 3 16 X 2 1 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box Driver Required A 2 is required for driving the anchor into the base material. FLAT PHILLIPS HEAD Can be driven with Phillips Screw Driver. SELF-TAPPING-Taps threads directly into masonry and requires no other anchor. Applications The anchor is made from Carbon Steel, and is Blue. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. Head Style The anchor is a Flat Countersunk Phillips head and is designed to prevent the head from protruding above the surface of the item being attached. Environment The anchor is designed for use in a Dry environment. DIAMOND POINT-Easier to drive the screw to save time. This anchor is designed for use in Concrete, Block, and Brick. Hole Diameter / Bit Diameter The anchor requires a 5 / 32", hole to be drilled in the base material (Concrete, Block, and Brick). Diameter of Anchor The diameter of the anchor is 3 / 16". Length Anchor The length of the anchor is 2-1 / 4", Thread Length The length of the threads on the anchor is 1-3 / 4", in length. Minimum Embedment The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1", of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 3 / 4", to 1-1 / 4". This will ensure that the minimum embedment of 1", will be met. The 3 / 16", diameter anchor requires the hole in the fixture to be 1 / 4". Spacing between Anchors Each anchor must be spaced a minimum distance of 3", from each other when measured center to center. Edge Distance It is very not to install the anchor any closer than 2-1 / 4", from an unsupported edge of the concrete.

Chenango Supply 3 16 X 1 3 4 Phillips Flat Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 3 16 X 1 3 4

Chenango Supply 3 16 X 1 3 4 Phillips Flat Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 3 16 X 1 3 4

Chenango Supply 3 16 X 1 3 4 Phillips Flat Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 3 16 X 1 3 4

Chenango Supply 3 16 X 1 3 4 Phillips Flat Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 3 16 X 1 3 4 These are commonly known as Tapcons. 1000 Hour Salt Spray Test Coating. Concrete Screws or Tapcons are great for screwing into concrete. These Concrete Screws have received Product Control Notice of Acceptance (No. Used to anchor signs, fixtures to concrete and block buildings. Phillips Flat Head cuts its own threads in concrete. 15-0930.14) from the Miami-Dade Department of Regulatory and Economic Resources, certifying that they meet all Miami-Dade Requirements. These Concrete screws are Miami-Dade Compliant. IRWIN 1881131 Impact Performance Series Concrete Screw Drill-Drive Installation Set with Pro Set Case for 3 / 16-Inch and 1 / 4-Inch Screws, 9-Piece. DEWALT DWA 5100 Impact Ready Masonry Bit, 5 / 32", x 4", x 6". MKT Steel Conset Masonry Screw Anchor, Phillips Flat Head, 3 / 16", Diameter x 2-3 / 4", Length (Box of 100). Chenango Supply 3 / 16 x 1-1 / 4", Phillips Flat Head Concrete Screw Anchor. Chenango Supply 1 / 4 x 1-3 / 4", Hex Head Concrete Screw Anchor. Chenango Supply 1 / 4 x 2-1 / 4", Flat Head Concrete Screw Anchor. Chenango Supply 3 / 16 x 1-3 / 4", Hex Head Concrete Screw Anchor. DEWALT DW 511 1 / 2 in. 100 pieces With Drill Bit (Miami-Dade Compliant) (3 / 16 x 1-3 / 4). 100 pieces With Drill Bit (Miami-Dade Compliant) (1 / 4 x 2-1 / 4). 100 pieces With Drill Bit (Miami-Dade Compliant) (3 / 16 x 1-1 / 4). Hammer Drill, TACKLIFE 1 / 2 In. 100 pieces With Drill Bit (Miami-Dade Compliant) (3 / 16 x 2-3 / 4). 2800 rpm Dual Drills Mode, Variable Speed Trigger, 360 Reversible Handle, Speed Setting Knob for Concrete, Wood, Steel, Masonry - PID 01 A. (13 mm) 7.8 Amp VSR Corded Hammer Drill. 100 pieces With Drill Bit (Miami-Dade Compliant) (1 / 4 x 1-3 / 4"). Chenango Supply 3 / 16 x 2-3 / 4", Phillips Flat Head Concrete Screw Anchor.

Chenango Supply 1 4 X 4 Flat Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 1 4 X 4

Chenango Supply 1 4 X 4 Flat Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 1 4 X 4

Chenango Supply 1 4 X 4 Flat Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 1 4 X 4

Chenango Supply 1 4 X 4 Flat Head Concrete Screw Anchor 100 Pieces With Drill Bit Miami Dade Compliant 1 4 X 4 These Concrete screws are Miami-Dade Compliant. These are commonly known as Tapcons. 1000 Hour Salt Spray Test Coating. These Concrete Screws have received Product Control Notice of Acceptance (No. Used to anchor signs, fixtures to concrete and block buildings. Phillips Flat Head cuts its own threads in concrete. 15-0930.14) from the Miami-Dade Department of Regulatory and Economic Resources, certifying that they meet all Miami-Dade Requirements. Concrete Screws or Tapcons are great for screwing into concrete.

CONFAST 1 4 X 5 Hex Head Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 1 4 X 5 Hex Head Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 1 4 X 5 Hex Head Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 1 4 X 5 Hex Head Concrete Screw Anchor With Drill Bit 100 Per Box Environment The anchor is designed for use in a Dry environment. SLOTTED HEX HEAD-Can be driven with a nut driver. Head Style The anchor is a Hex Washer head and is designed to allow the head to sit on top of the surface of the item being attached. DIAMOND POINT-Easier to drive the screw to save time. This anchor is designed for use in Concrete, Block, and Brick. Applications The anchor is made from Carbon Steel, and is Blue. The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. SELF-TAPPING-Taps threads directly into masonry and requires no other anchor. Hole Diameter / Bit Diameter The anchor requires a 3 / 16", hole to be drilled in the base material (Concrete, Block, and Brick). Driver Required A 5 / 16", is required for driving the anchor into the base material. Diameter of Anchor The diameter of the anchor is 1 / 4". Length Anchor The length of the anchor is 5", Thread Length The length of the threads on the anchor is 1-1 / 4", in length. Minimum Embedment The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1", of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 3-1 / 2", to 4". This will ensure that the minimum embedment of 1", will be met. The 1 / 4", diameter anchor requires the hole in the fixture to be 5 / 16". Spacing between Anchors Each anchor must be spaced a minimum distance of 4", from each other when measured center to center. Edge Distance It is very not to install the anchor any closer than 3", from an unsupported edge of the concrete.

CONFAST 1 4 X 2 1 4 Flat Phillips Concrete Screw With 3 Drill Bits 300 Per Box

CONFAST 1 4 X 2 1 4 Flat Phillips Concrete Screw With 3 Drill Bits 300 Per Box

CONFAST 1 4 X 2 1 4 Flat Phillips Concrete Screw With 3 Drill Bits 300 Per Box

CONFAST 1 4 X 2 1 4 Flat Phillips Concrete Screw With 3 Drill Bits 300 Per Box The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. Driver Required A 3 is required for driving the anchor into the base material. Head Style The anchor is a Flat Countersunk Phillips head and is designed to prevent the head from protruding above the surface of the item being attached. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. FLAT PHILLIPS HEAD Can be driven with Phillips Screw Driver. Environment The anchor is designed for use in a Dry environment. SELF-TAPPING-Taps threads directly into masonry and requires no other anchor. This anchor is designed for use in Concrete, Block, and Brick. DIAMOND POINT-Easier to drive the screw to save time. Applications The anchor is made from Carbon Steel, and is Blue. Hole Diameter / Bit Diameter The anchor requires a 3 / 16", hole to be drilled in the base material (Concrete, Block, and Brick). Diameter of Anchor The diameter of the anchor is 1 / 4". Length Anchor The length of the anchor is 2-1 / 4", Thread Length The length of the threads on the anchor is 1-3 / 4", in length. Minimum Embedment The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1", of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 3 / 4", to 1-1 / 4". This will ensure that the minimum embedment of 1", will be met. The 1 / 4", diameter anchor requires the hole in the fixture to be 5 / 16". Spacing between Anchors Each anchor must be spaced a minimum distance of 4", from each other when measured center to center. Edge Distance It is very not to install the anchor any closer than 3", from an unsupported edge of the concrete.

IRWIN Tools 1870568 Impact Performance Series Concrete Screw Installation 3 16 Inch X 5 Inch Drill Bit For 1 4 Inch Screws

IRWIN Tools 1870568 Impact Performance Series Concrete Screw Installation 3 16 Inch X 5 Inch Drill Bit For 1 4 Inch Screws

IRWIN Tools 1870568 Impact Performance Series Concrete Screw Installation 3 16 Inch X 5 Inch Drill Bit For 1 4 Inch Screws

IRWIN Tools 1870568 Impact Performance Series Concrete Screw Installation 3 16 Inch X 5 Inch Drill Bit For 1 4 Inch Screws One-piece construction withstands higher torque loads than standard quick-change bits. They have a one-piece construction that withstands higher torque loads than standard quick-change bits that are built with a two-piece design. Built for maximum durability and long life with impact drivers. Innovative pressed carbide tip with aggressive cutting angles for faster drilling and longer bit life. once the hex collar is flush with the concrete surface, hole is the perfect depth! Black oxide finish resists corrosion and increases life of bit. They have a built-in hex collar stop feature for drilling the perfect hole depth for Tapcon screws, as well as other concrete screws. There's no need for the frustrating task of marking drill bits with masking tape, wrapping electrical wire around the bit, or using cumbersome stop rings to get the perfect depth? IRWIN Impact Performance Series Tapcon installation bits are engineered for maximum durability and long life with impact drivers. MKT Steel Conset Masonry Screw Anchor, Hex Washer Head Faced, 1 / 4", Diameter x 2-3 / 4", Length (Box of 100). IRWIN Tools 1900836 Concrete Screw Drive Sleeve Compatible with Impact Performance Series and Drills. Chenango Supply 1 / 4 x 1-1 / 4", Hex Head Concrete Screw Anchor. Halex 96843 2 Count 1-1 / 4-Inch X 1-Inch RGD Reducing Washer. Unique Home Trunk Organizer Storage Unit - Great Car Organizer For Any Type Of Car. Ridgid 18368 S 18 Head Assembly for S 18 Bolt Cutters. 100 pieces With Drill Bit (Miami-Dade Compliant) (1 / 4 x 1-1 / 4). LFI Lights - UL Certified Hardwired Green LED Emergency Exit Sign - Modern Design - Battery Backup - LEDGBBJR. IRWIN Tools 1870566 Impact Performance Series Concrete Screw Installation 5 / 32-Inch X 5-Inch Drill Bit for 3 / 16-Inch Screws. IRWIN 1881131 Impact Performance Series Concrete Screw Drill-Drive Installation Set with Pro Set Case for 3 / 16-Inch and 1 / 4-Inch Screws, 9-Piece. IRWIN Tools 1870565 Impact Performance Series Concrete Screw Installation 5 / 32-Inch X 4-Inch Drill Bit for 3 / 16-Inch Screws. They're available in multiple lengths for drilling the most common hole depths for masonry fastener applications. Plus, they have a black oxide finish that resists corrosion and increases the life of the bit, and a 1 / 4", quick-change shank that's designed to work with impact drivers, as well as reduce slipping in standard drill chucks.

CONFAST 3 16 X 3 3 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 3 16 X 3 3 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 3 16 X 3 3 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 3 16 X 3 3 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. SELF-TAPPING-Taps threads directly into masonry and requires no other anchor. Driver Required A 2 is required for driving the anchor into the base material. Applications The anchor is made from Carbon Steel, and is Blue. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. FLAT PHILLIPS HEAD Can be driven with Phillips Screw Driver. Environment The anchor is designed for use in a Dry environment. DIAMOND POINT-Easier to drive the screw to save time. This anchor is designed for use in Concrete, Block, and Brick. Head Style The anchor is a Flat Countersunk Phillips head and is designed to prevent the head from protruding above the surface of the item being attached. Hole Diameter / Bit Diameter The anchor requires a 5 / 32", hole to be drilled in the base material (Concrete, Block, and Brick). Diameter of Anchor The diameter of the anchor is 3 / 16". Length Anchor The length of the anchor is 3-3 / 4", Thread Length The length of the threads on the anchor is 1-3 / 4", in length. Minimum Embedment The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1", of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 2-1 / 4", to 2-3 / 4". This will ensure that the minimum embedment of 1", will be met. The 3 / 16", diameter anchor requires the hole in the fixture to be 1 / 4". Spacing between Anchors Each anchor must be spaced a minimum distance of 3", from each other when measured center to center. Edge Distance It is very not to install the anchor any closer than 2-1 / 4", from an unsupported edge of the concrete.

CONFAST 1 4 X 2 3 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 1 4 X 2 3 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 1 4 X 2 3 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box

CONFAST 1 4 X 2 3 4 Flat Phillips Concrete Screw Anchor With Drill Bit 100 Per Box Driver Required A 3 is required for driving the anchor into the base material. DIAMOND POINT-Easier to drive the screw to save time. The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill. This anchor is designed for use in Concrete, Block, and Brick. FLAT PHILLIPS HEAD Can be driven with Phillips Screw Driver. SELF-TAPPING-Taps threads directly into masonry and requires no other anchor. Head Style The anchor is a Flat Countersunk Phillips head and is designed to prevent the head from protruding above the surface of the item being attached. Fixture Hole Diameter The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. Environment The anchor is designed for use in a Dry environment. Applications The anchor is made from Carbon Steel, and is Blue. Hole Diameter / Bit Diameter The anchor requires a 3 / 16", hole to be drilled in the base material (Concrete, Block, and Brick). Diameter of Anchor The diameter of the anchor is 1 / 4". Length Anchor The length of the anchor is 2-3 / 4", Thread Length The length of the threads on the anchor is 1-3 / 4", in length. Minimum Embedment The minimum anchor embedment into the concrete is 1". Therefore, the anchor must be installed so that a minimum of 1", of the anchor is embedded into the concrete. Maximum Fixture Thickness The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 1-1 / 4", to 1-3 / 4". This will ensure that the minimum embedment of 1", will be met. The 1 / 4", diameter anchor requires the hole in the fixture to be 5 / 16". Spacing between Anchors Each anchor must be spaced a minimum distance of 4", from each other when measured center to center. Edge Distance It is very not to install the anchor any closer than 3", from an unsupported edge of the concrete.

Recent Topics

Top 20 for Best Used Dress Forms

Top 20 for Best Used Dress Forms

Polysorb stability cradle provides advanced arch support and deep heel cupping. Metatarsal arch support offloads pressure from the ball of foot to help relieve forefoot pain. athletes looking for support who participate in a variety of physical activities. Hand wash in warm water. Total support with targeted cushioning. Forefoot crash pad provides extra cushioning under the ball of foot for a ...

October 15, 2019

Read more

Top 24 Mini Flasks For Sale

Top 24 Mini Flasks For Sale

License b Creative. Durable enough to travel with you throughout the day, while the cap screws on tight for leak-free performance. Stay prepared on the go with this super convenient keychain flask. About The Design: Jim Baldwin. The printed and laminated graphic wrap adds color and character to the metal body. About The Product: You never know when you might need a pick-me-up swig of your ...

October 15, 2019

Read more

Top 22 for Best Cheap Jars In Bulk

Top 22 for Best Cheap Jars In Bulk

Maximum cure: 3-7 day. PC-Super Epoxy has a viscosity similar to Vaseline making overhead and sidewall work easy without drip or sag. Tack free cure time: 45 minutes. Gardner impact resistance: 160 in. A small putty knife or flexible artist spatula are great tools for mixing and applying PC-Super Epoxy. In cold or cool temperatures, place PC-Super Epoxy container near heat prior to using. Work ...

October 15, 2019

Read more

Top 19 Square Vinyl Caps

Top 19 Square Vinyl Caps

Durable protective closure. Economically priced. Easy to use - push on, pull off. VSC Series vinyl square caps are designed for use with square tubing. A: 1.875, B: 065, C: 500. The caps are strong and tough, yet flexible enough to stretch for a perfect fit. Reference your square dimension to select size. Excellent finishing parts. Flexible vinyl material with a wide range of square sizes and ...

October 15, 2019

Read more

Top 23 Best Casters

Top 23 Best Casters

Capacity 125 LB per wheel Total 1, 000 LB. Reliable Hardware Company RH-5134 BO-A 3 / 4-Inch Black Oxide Wood Screw and Wax. Caster Wheels Swivel Plate Stem Break Casters On Red Polyurethane Wheels 880 Lbs (4 inch with brake). 10 Pack 4-1 / 2", Auto Body Sanding Flap Discs 80 Grit. Franklin International 5006 Titebond II Premium Wood Glue - Gallon. POWERTEC 20304 Push / Pull Quick-Release Toggle ...

October 15, 2019

Read more

21 Best Autoclave Pressure Steam Sterilizers

21 Best Autoclave Pressure Steam Sterilizers

The old sealing ring is black! Item specifics: Color classification: Yx-280 B new YX-280 A YX-280 B old YX-280 A new style. Shanghai three Shen medical high pressure sterilizer. Pressure steam sterilizer YX-280 B new sealing ring is white, the new autoclave sterilizer accessories! ...

October 14, 2019

Read more

20 Great Temperature Sensors Cheap

20 Great Temperature Sensors Cheap

Coil Temperature Sensor. Traulsen 337-60317-00 Relay Module Mit Ii 110-Volt Alternating Current. MANITOWOC ICE 7627813 Single Ice Thickness Control. Manitowoc Ice 2008029 Ice Thickness Control Probe. Dormont 1675 KITB 48 Safety System Kit, 3 / 4", Diameter. Traulsen 337-60405-02 (or 334-60405-02) Temperature Sensor Green 74", Replacement. Traulsen 337-60360-01 Hybrid Relay With Surge Damper. ...

October 14, 2019

Read more

Coolest 23 Half Size Steam Pans

Coolest 23 Half Size Steam Pans

Warning: Do not use in Microwave. x 1 F 370; COMPLETELY VERSATILE AND MULTI-PURPOSE -This pan is safe for using in freezer and oven due to the high quality material, works great for hot or cold foods, perfect for cooking, baking, roasting, reheating, transport or storage, can be using as takeout containers, ideal for Party, BBQ, Camping, Daily kitchen use, any occasion. x 1 F 370; MATERIAL - Made ...

October 14, 2019

Read more

Best 19 Cheap Robotic Pool Cleaner

Best 19 Cheap Robotic Pool Cleaner

Robotic vacuum automatically cleans the bottom of your swimming pool. This robotic pool vacuum uses smart steering technology and an efficient cleaning pattern to clean your pool floor in about 2 hours. 2 fine porosity filter elements can easily be rinsed with garden hose. Its top access filter makes cleaning easy, and you can simply rinse the 2 fine porosity filters with a garden hose. This pool ...

October 14, 2019

Read more

Coolest 19 12V Hydraulic Power Packs

Coolest 19 12V Hydraulic Power Packs

120 mm x 120 mm x 25 mm 12 V 2 Pin hydraulic bearing cooling fan for computer case. It runs quite fast and has large airflow to enhance cooling performance. This fan is hydraulic bearing, with the power around 6 WATT. 2 Pins IDE power connector cooling fan for desktop computer case. Features: 120 mm x 120 mm x 25 mm 12 V 2 Pin hydraulic bearing cooling fan for computer case. Help push the hot air ...

October 13, 2019

Read more

21 Best and Coolest Display Cases On Wheels

21 Best and Coolest Display Cases On Wheels

18.75", X 12.3", X 13.25", D BASKET ON WHEELS WITH PULL HANDLE RED - CASE PACK 6. 18.75", X 12.3", X 13.25", D BASKET ON WHEELS WITH PULL HANDLE RED - CASE PACK 6. ...

October 13, 2019

Read more

Best Aneroid Barometers out of top 8

Best Aneroid Barometers out of top 8

Widely-used Perfect for both professional clinic and home use. Adjustable Hook and loop design makes it flexible and adjustable, suitable for anyone. Arm sphygmomanometer Color: Black Material: Zinc Alloy Nylon Polyvinyl Chloride Size of Stethoscope: Approx. Durable Ensure a high accuracy of measuring result even after a long time use. Convenient A storage bag is provided for outdoor carry. Help ...

October 13, 2019

Read more

Top 24 Best Worm Gears

Top 24 Best Worm Gears

Uxcell you can believe in. Quality Authentic Uxcell brand, we are the ORIGINAL, now copied by many, but they cannot match our constant improvement of quality and personal care. Choose a brand you can trust, by people who use their own products. Voltage: DC 12 V; No-Load Speed: 111 rpm; Reduction Ratio: 1: 36; Torque: 4 Kg. Application: Worm Gear Motor With Encoder And Cable, widely used for self ...

October 13, 2019

Read more

Best and Coolest 23 Harvestors

Best and Coolest 23 Harvestors

International Harvester Power Take Off Shift Guide Cub. Pictures shown are representational only and do not necessarily reflect the actual part you will receive. ...

October 13, 2019

Read more

22 Coolest Vacuum Pumps And Systems

22 Coolest Vacuum Pumps And Systems

We are professional, we all have all types. You can even make your own penis pump or get a professionally manfuctured one What Can I Use a Penis Pump For? In fact, in the trial of former judge Donald Thompson, who was discovered wearing a penis pump while he was overseeing Oklahoma trials, expert witness testimony, from a urologist, that penis pumps were a low-cost and effective treatment for ...

October 13, 2019

Read more

Top 20 Best Household Water Pumps Discount

Top 20 Best Household Water Pumps Discount

This is common in operations where frequent grease is required and dirt and debris isn't a concern. Uses Grade 10 balls. Available with Rubber Seals, Metal Shields, or Open. Some types available in Stainless Steel. Single row radial ball bearing. Made from 52100 High Carbon Steel. They are manufactured in either C 3 with tighter clearance tolerances or standard C 0 clearances which may overlap ...

October 12, 2019

Read more

Top 21 Best Wooden Door Handles On Sale

Top 21 Best Wooden Door Handles On Sale

black frosted, high quality carbon steel, corrosion protection, environmental protection, non-pollution. High purity bearing steel Gcr 15, passed the test of opening - closing for 100000 times, wear-resisting, ensure the stability of the move and the wheel's fluency. 90 days time (If you did not like it or no longer need, under situation of the product does not affect the second that you could to ...

October 12, 2019

Read more

Top 21 for Best Industrial Suction Pumps

Top 21 for Best Industrial Suction Pumps

The mechanical action is categorized as either positive displacement (PD) or kinetic. The company is headquartered in Royersford, PA. The pump housing has buna-n mechanical seal and O-ring, a fill and drain plug for easy servicing, and a double volute chamber for reduced radial load on the impeller. Cast iron with buna-n mechanical seal and O-ring. American Machine and Tool (AMT) manufactures ...

October 12, 2019

Read more

Top 21 Best Merchandise Display Racks

Top 21 Best Merchandise Display Racks

1 Triangle Base with Caster. 9 Grid Clips for Assembling. Triangle Grid Merchandise Display Mobile Gridwall Floor Rack 2 ft x 6 ft Black NEW. ...

October 12, 2019

Read more

22 Most Wanted Medication Labels

22 Most Wanted Medication Labels

Label Reads: TAKE THIS MEDICATION 1 / 2 HOUR BEFORE MEALS. Dosing Information Labels. Pharmacy Warning Label. ...

October 12, 2019

Read more

Calendar